Model: | Cab Produkttechnik GmbH Maestro 3E/450 |
Category: | |
Condition: | |
Location: | California, USA |
Offered by: |
Page 1 Operator's Manual MACH1 Label Printer Made in Germany.; Page 2 Please check www.cab.de for the latest update. Terms and conditions Deliveries and performances are effected under the General conditions of sale of cab Produkttechnik GmbH & Co. Germany France Asia cab Produkttechnik cab technologies s.a.r.l. Cab offers you documentation and software for download and online support. Support print and apply systems +49 721 6626 333 Support marking lasers +49 721 6626 499. Cab Produkttechnik GmbH & Co. 14 76131 Karlsruhe Germany Call us Email us Request support. Cab Produkttechnik GmbH & Co. KG is participating on FACHPACK 2019 in Nuremberg Germany. Plan your visit to the trade fair and coordinate your appointments. On our website, we would like to use the services of third-party providers who help us improve our promotional offerings (marketing), evaluate the use of our website (performance) and adapt.
Cab Maestro 3E/450 PCB Separator Depaneler p/n 8933945
This item is USED & Operational
THIS ITEM COMES WITH WHAT YOU SEE IN THE PICTURES IF YOU DON’T SEE IT, YOU PROBABLY WON’T GET IT.
as/is
Buyer will be charged for a pallet
The Maestro 3 separates both small and large pre-scored PCBs. The circular and linear blades made from a special steel ensure a long service life. The pre-scored grooves can be interrupted by any number of cut-outs.
The clearance between the circular blades can be precisely adjusted with the rotary knob and is shown on the scale. Tests have revealed that the larger the clearance between the circular and linear blades, the smaller the stress produced during the separation process.
During the operation, the PCB is placed with its pre-scored groove onto the linear blade and the circular blade is then drawn by hand across the PCB. The clearance between the upper guide and the linear blade is adjustable to ensure that the PCB is only separated in the pre-scored groove.
Separation type
Component side: circular blade
Solder side: linear blade
Asset# 60237
LOC: SR1 Cart 3 Shelf 5 02_13_2020 - RMW
You will use cablabel S3 with a cab printer connected to the network?
To connect the printer, you need first to:
- Connect the cab printer to the network with a not provided Ethernet cable or if appropriate by Wi-Fi.
- After that restart the printer.
- And search in the « Short status » menu, the information about the IPv4 address corresponding to your used connection type.
Attention: for the assignment or reservation of an IP address, please contact your system administrator.
To configure cablabel S3 you need to:
- First, install or update your cablabel S3 version.
- After that add a new device corresponding to your model.
- Then select the « TCP » port type and fill in the IP address previously collected on the printer.
Notice: the installation of the Windows driver is only necessary for the MACH1 and MACH2 printers, or if you want to use a cab printer from the network with any other software.
Download Cab Produkttechnik Gmbh Frankfurt
For more information or for an installation of the Windows driver, download the detailed guide: